Bump Test

Purpose: A bump test is conducted to ensure that gas detectors are functioning correctly. This involves exposing the detector to a known concentration of gas to verify that the sensors and alarms respond appropriately.

Procedure: The bump test is a brief procedure. It involves exposing the gas detector to a test gas with a known concentration higher than the alarm set points. This verifies that the sensor responds to the gas and that the alarm activates correctly.

Frequency: Bump tests are recommended daily or before each use of the gas detector.

Outcome: The bump test confirms that the gas detector is operational and that the alarms are functioning. However, it does not measure or adjust the accuracy of the gas readings.

Calibration

Purpose: Calibration adjusts the gas detector to ensure that its readings are accurate. This is vital for reliable gas detection and safety.

Procedure: Calibration involves exposing the detector to a certified concentration of gas and adjusting the device’s response to match this known concentration. This corrects any deviations or sensor drift that may have occurred over time.

Frequency: Calibration is typically required periodically, as specified by the manufacturer, usually every 3 to 6 months. Additionally, calibration may be necessary if a bump test indicates that the detector is not responding correctly.

Outcome: Calibration ensures that the gas detector’s readings are accurate and reliable, maintaining the precision necessary for effective gas detection.

Key Differences

• Objective
   
  • Bump Test: Checks basic functionality and alarm response.
  • Calibration: Ensures measurement accuracy and corrects sensor drift.
• Process
  
  
  • Bump Test: Quick and simple exposure to test gas.
  • Calibration: Detailed procedure involving adjustment of sensor readings.
• Frequency
  
  
  • Bump Test: Daily or before each use.
  • Calibration: Periodically (every few months) or as needed based on bump test results.
• Outcome
  
  
  • Bump Test: Confirms operational status.
  • Calibration: Ensures precision and accuracy of readings.

Understanding these differences helps in maintaining the reliability and safety of gas detection equipment. Regular bump tests confirm that the detectors are operational and ready to use, while periodic calibration ensures that the readings are accurate and reliable. Together, these practices protect workers and help comply with safety regulations, ensuring a safer workplace.

By adhering to both bump test and calibration schedules, safety managers can ensure that gas detectors provide the necessary protection to maintain an injury-free workplace.

When was your last Bump Test?  Schedule a Bump Test Now!